A data-science approach to predict the heat capacity of nanoporous materials.

The heat capacity of a material is a fundamental property of great practical importance. For example, in a carbon capture process, the heat required to regenerate a solid sorbent is directly related to the heat capacity of the material. However, for most materials suitable for carbon capture applications, the heat capacity is not known, and thus the standard procedure is to assume the same value for all materials. In this work, we developed a machine learning approach, trained on density functional theory simulations, to accurately predict the heat capacity of these materials, that is, zeolites, metal-organic frameworks and covalent-organic frameworks. The accuracy of our prediction is confirmed with experimental data. Finally, for a temperature swing adsorption process that captures carbon from the flue gas of a coal-fired power plant, we show that for some materials, the heat requirement is reduced by as much as a factor of two using the correct heat capacity.

Different Protocols of Combined Application of Photobiomodulation In Vitro and In Vivo Plus Adipose-Derived Stem Cells Improve the Healing of Bones in Critical Size Defects in Rat Models.

Introduction: Long bone segmental deficiencies are challenging complications to treat. Hereby, the effects of the scaffold derived from the human demineralized bone matrix (hDBMS) plus human adipose stem cells (hADSs) plus photobiomodulation (PBM) (in vitro and or in vivo) on the catabolic step of femoral bone repair in rats with critical size femoral defects (CDFDs) were evaluated with stereology and high stress load (HSL) assessment methods. Methods: hADSs were exposed to PBM in vitro; then, the mixed influences of hDBMS+hADS+PBM on CSFDs were evaluated. CSFDs were made on both femurs; then hDBMSs were engrafted into both CSFDs of all rats. There were 6 groups (G)s: G1 was the control; in G2 (hADS), hADSs only were engrafted into hDBMS of CSFD; in G3 (PBM) only PBM therapy for CSFD was provided; in G4 (hADS+PBM in vivo), seeded hADSs on hDBMS of CSFDs were radiated with a laser in vivo; in G5 (hADSs+PBM under in vitro condition), hADSs in a culture system were radiated with a laser, then transferred on hDBMS of CSFDs; and in G6 (hADS+PBM in conditions of in vivo and in vitro), laser-exposed hADSs were transplanted on hDBMS of CSFDs, and then CSFDs were exposed to a laser in vivo. Results: Groups 4, 5, and 6 meaningfully improved HSLs of CSFD in comparison with groups 3, 1, and 2 (all, P=0.001). HSL of G5 was significantly more than G4 and G6 (both, P=0.000). Gs 6 and 4 significantly increased new bone volumes of CSFD compared to Gs 2 (all, P=0.000) and 1 (P=0.001 & P=0.003 respectively). HSL of G 1 was significantly lower than G5 (P=0.026). Conclusion: HSLs of CSFD in rats that received treatments of hDBMS plus hADS plus PBM were significantly higher than treatments with hADS and PBM alone and control groups.

3D vs. turbostratic: controlling metal-organic framework dimensionality via N-heterocyclic carbene chemistry.

Using azolium-based ligands for the construction of metal-organic frameworks (MOFs) is a viable strategy to immobilize catalytically active N-heterocyclic carbenes (NHC) or NHC-derived species inside MOF pores. Thus, in the present work, a novel copper MOF referred to as Cu-Sp5-BF4, is constructed using an imidazolinium ligand, H2Sp5-BF4, 1,3-bis(4-carboxyphenyl)-4,5-dihydro-1H-imidazole-3-ium tetrafluoroborate. The resulting framework, which offers large pore apertures, enables the post-synthetic modification of the C2 carbon on the ligand backbone with methoxide units. A combination of X-ray diffraction (XRD), solid-state nuclear magnetic resonance (ssNMR) and electron microscopy (EM), are used to show that the post-synthetic methoxide modification alters the dimensionality of the material, forming a turbostratic phase, an event that further improves the accessibility of the NHC sites promoting a second modification step that is carried out via grafting iridium to the NHC. A combination of X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) methods are used to shed light on the iridium speciation, and the catalytic activity of the Ir-NHC containing MOF is demonstrated using a model reaction, stilbene hydrogenation.

Photobiomodulation and Stem Cell on Repair of Osteoporotic Bones.

Objective: This study examined the use of photobiomodulation (PBM) plus adipose-derived stem cells (ASCs) to enhance the osteogenic properties of demineralized bone matrix (DBM) scaffold in a critical size femoral defect (CSFD) of ovariectomy-induced osteoporotic (OVX) rats. Background: PBM could be used as a unique strategy to enhance the osteogenic potential of DBMs seeded with ASCs. Materials and methods: The OVX rats with a CSFD were divided into six groups: (1) Control (C); (2) DBM scaffold alone (S); (3) S+PBM; (4) S+alendronate; (5) S+ASC; (6) S+PBM+ASC. Stereological analysis, real-time polymerase chain reaction (RT-PCR), and cone-beam computed tomography (CBCT) were performed after euthanization at 4 and 8 weeks postimplantation surgery. Results: In the 8th week, Groups 4 and 6 showed a greatly high new trabecular bone volume than the scaffold group (all, p = 0.009). The CBCT data demonstrated that the CSFD was significantly smaller in the two, three, and six groups relative to the control group (p = 0.01, p = 0.000, and p = 0.000, respectively). RT-PCR revealed that Groups 3 and 6 had higher messenger RNA levels of osteocalcin (OC) and osteoprotegerin (OPG) compared with the control group (p = 0.05). Group 6 had significantly lower expression of receptor activator of nuclear factor-κB ligand (RANKL) compared with the control group (p = 0.02). Conclusions: The combination of DBM plus PBM plus ASC, as well as DBM plus PBM significantly improved the healing of CSFD in OVX rats, and affected the expression of OPG, OC, and RANKL genes.

Evaluation of the effects of preconditioned human stem cells plus a scaffold and photobiomodulation administration on stereological parameters and gene expression levels in a critical size bone defect in rats.

We assessed the impact of photobiomodulation (PBM) plus adipose-derived stem cells (ASCs) during the anabolic and catabolic stages of bone healing in a rat model of a critical size femoral defect (CSFD) that was filled with a decellularized bone matrix (DBM). Stereological analysis and gene expression levels of bone morphogenetic protein 4 (BMP4), Runt-related transcription factor 2 (RUNX2), and stromal cell-derived factor 1 (SDF1) were determined. There were six groups of rats. Group 1 was the untreated control or DBM. Study groups 2-6 were treated as follows: ASC (ASC transplanted into DBM, then implanted in the CSFD); PBM (CSFD treated with PBM); irradiated ASC (iASC) (ASCs preconditioned with PBM, then transplanted into DBM, and implanted in the CSFD); ASC + PBM (ASCs transplanted into DBM, then implanted in the CSFD, followed by PBM administration); and iASC + PBM (the same as iASC, except CSFDs were exposed to PBM). At the anabolic step, all treatment groups had significantly increased trabecular bone volume (TBV) (24.22%) and osteoblasts (83.2%) compared to the control group (all, p = .000). However, TBV in group iASC + PBM groups were superior to the other groups (97.48% for osteoblast and 58.8% for trabecular bone volume) (all, p = .000). The numbers of osteocytes in ASC (78.2%) and iASC + PBM (30%) groups were remarkably higher compared to group control (both, p = .000). There were significantly higher SDF (1.5-fold), RUNX2 (1.3-fold), and BMP4 (1.9-fold) mRNA levels in the iASC + PBM group compared to the control and some of the treatment groups. At the catabolic step of bone healing, TBV increased significantly in PBM (30.77%), ASC + PBM (32.27%), and iASC + PBM (35.93%) groups compared to the control group (all, p = .000). There were significantly more osteoblasts and osteocytes in ASC (71.7%, 62.02%) (p = .002, p = .000); PBM (82.54%, 156%), iASC (179%, 23%), and ASC + PBM (108%, 110%) (all, p = .000), and iASC + PBM (79%, 100.6%) (p = .001, p = .000) groups compared to control group. ASC preconditioned with PBM in vitro plus PBM in vivo significantly increased stereological parameters and SDF1, RUNX2, and BMP4 mRNA expressions during bone healing in a CSFD model in rats.

Simultaneous Treatment of Photobiomodulation and Demineralized Bone Matrix With Adipose-Derived Stem Cells Improve Bone Healing in an osteoporotic bone defect.

Introduction: The ability of simultaneous treatment of critical-sized femoral defects (CSFDs) with photobiomodulation (PBM) and demineralized bone matrix (DBM) with or without seeded adipose-derived stem cells (ASCs) to induce bone reconstruction in ovariectomized induced osteoporotic (OVX) rats was investigated. Methods: The OVX rats with CSFD were arbitrarily separated into 6 groups: control, scaffold (S, DBM), S + PBM, S + alendronate (ALN), S + ASCs, and S + PBM + ASCs. Each group was assessed by cone beam computed tomography (CBCT) and histological examinations. Results: In the fourth week, CBCT and histological analyses revealed that the largest volume of new bone formed in the S + PBM and S + PBM + ASC groups. The S + PBM treatment relative to the S and S + ALN treatments remarkably reduced the CSFD (Mann-Whitney test, P = 0.009 and P = 0.01). Furthermore, S + PBM + ASCs treatment compared to the S and S + ALN treatments significantly decreased CSFD (Mann Whitney test, P = 0.01). In the eighth week, CBCT analysis showed that extremely enhanced bone regeneration occurred in the CSFD of the S + PBM group. Moreover, the CSFD in the S + PBM group was substantially smaller than S, S + ALN and S + ASCs groups (Mann Whitney test, P = 0.01, P = 0.02 and P = 0.009). Histological observations showed more new bone formation in the treated CSFD of S + PBM + ASCs and S + PBM groups. Conclusion: The PBM plus DBM with or without ASCs significantly enhanced bone healing in the CSFD in OVX rats compared to control, DBM alone, and ALN plus DBM groups. The PBM plus DBM with or without ASCs significantly decreased the CSFD area compared to either the solo DBM or ALN plus DBM treatments.

Toward Optimal Photocatalytic Hydrogen Generation from Water Using Pyrene-Based Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are promising materials for the photocatalytic H2 evolution reaction (HER) from water. To find the optimal MOF for a photocatalytic HER, one has to consider many different factors. For example, studies have emphasized the importance of light absorption capability, optical band gap, and band alignment. However, most of these studies have been carried out on very different materials. In this work, we present a combined experimental and computation study of the photocatalytic HER performance of a set of isostructural pyrene-based MOFs (M-TBAPy, where M = Sc, Al, Ti, and In). We systematically studied the effects of changing the metal in the node on the different factors that contribute to the HER rate (e.g., optical properties, the band structure, and water adsorption). In addition, for Sc-TBAPy, we also studied the effect of changes in the crystal morphology on the photocatalytic HER rate. We used this understanding to improve the photocatalytic HER efficiency of Sc-TBAPy, to exceed the one reported for Ti-TBAPy, in the presence of a co-catalyst.

A Two Step Postsynthetic Modification Strategy: Appending Short Chain Polyamines to Zn-NH2-BDC MOF for Enhanced CO2 Adsorption.

Functionalizing metal-organic frameworks (MOFs) with amines is a commonly used strategy to enhance their performance in CO2 capture applications. As such, in this work, a two-step strategy to covalently functionalize NH2-containing MOFs with short chain polyamines was developed. In the first step, the parent MOF, Zn4O(NH2-BDC)3, was exposed to bromoacetyl bromide (BrAcBr), which readily reacts with pendant -NH2 groups on the 2-amino-1,4-benzenedicarboxylate (NH2-BDC2-) ligand. 1H NMR of the digested MOF sample revealed that as much as 90% of the MOF ligands could be functionalized in the first step. Next, the MOF samples 60% of the ligands functionalized with acetyl bromide, Zn4O(NH2-BDC)1.2(BrAcNH-BDC)1.8, was exposed to several short chain amines including ethylenediamine (ED), diethylenetriamine (DETA), and tris(2-aminoethyl)amine (TAEA). Subsequent digested 1H NMR analysis indicated that a total of 30%, 28%, and 19% of the MOF ligands were successfully grafted to ED, DETA, and TAEA, respectively. Next, the CO2 adsorption properties of the amine grafted MOFs were studied. The best performing material, TAEA-appended-Zn4O(NH2-BDC)1.2(BrAcNH-BDC)1.8, exhibits a zero-coverage isosteric heat of CO2 adsorption of -62.5 kJ/mol, a value that is considerably higher than the one observed for the parent framework, -21 kJ/mol. Although the boosted CO2 affinity only leads to a slight increase in the CO2 adsorption capacity in the low-pressure regime (0.15 bar), which is of interest in postcombustion carbon dioxide capture, the CO2/N2 (15/85) selectivity at 313 K is 143, a value that is ∼35 times higher than the one observed for Zn4O(NH2-BDC)3, 4.1. Such enhancements are attributed to accessible primary amines, which were grafted to the MOF ligand. This hypothesis was further supported via in situ DRIFTS measurements of TAEA-Ac-Zn4O(NH2-BDC)1.2(BrAcNH-BDC)1.8 after exposure to CO2, which revealed the chemisorption of CO2 via the formation of hydrogen bonded carbamates/carbamic acid and CO2δ- species; the latter are adducts formed between CO2 and [amineH]+Br- salts that are produced during the amine grafting step.

Mechanistic Study on Thermally Induced Lattice Stiffening of ZIF-8.

The flexibility of the ZIF-8 aperture, which inhibits a molecular cutoff of 3.4 Å, can be reduced by rapid heat treatment to obtain CO2-selective membranes. However, the early stages of the structural, morphological, and chemical changes responsible for the lattice rigidification remain elusive. Herein, using ex situ and in situ experiments, we determine that a small shrinkage of the unit-cell parameter, ∼0.2%, is mainly responsible for this transformation. Systematic gas permeation studies show that one needs to achieve this shrinkage without a disproportionately large shrinkage in the grain size of the polycrystalline film to avoid the formation of cracks. We show that this condition is uniquely achieved in a short time by exposure of ZIF-8 to a mildly humid environment where lattice parameter shrinkage is accelerated by the incorporation of linker vacancy defects, while the shrinkage in grain size is limited. The water-vapor-led incorporation of linker vacancy defects takes place with an energy barrier of 123 kJ mol-1, much higher than that for the thermal degradation of ZIF-8, <80 kJ mol-1. The latter is promoted by heat treatment in a dry environment at a relatively higher temperature; however, this condition does not shrink the lattice parameters at short exposure time.

Preconditioning adipose-derived stem cells with photobiomodulation significantly increased bone healing in a critical size femoral defect in rats.

We assessed the combined impacts of human demineralized bone matrix (hDBM) scaffold, adipose-derived stem cells (hADS), and photobiomodulation (PBM) on bone repair of a critical size femoral defect (CSFD) in 72 rats. The rats were divided into six groups: control (group 1); ADS (group 2 - ADS transplanted into hDBM); PBM (group 3 - PBM-treated CSFDs); ADS + PBM in vivo (group 4 - ADS transplanted into hDBM and the CSFDs were treated with PBM in vivo); ADS + PBM in vitro (group 5 - ADS were treated with PBM in vitro, then seeded into hDBM); and ADS + PBM in vitro+in vivo (group 6 - PBM-treated ADS were seeded into hDBM, and the CSFDs were treated with PBM in vivo. At the anabolic phase (2 weeks after surgery), bone strength parameters of the groups 5, 6, and 4 were statistically greater than the control, ADS, and PBM in vivo groups (all, p = 0.000). Computed tomography (CT) scans during the catabolic phase (6 weeks after surgery) of bone healing revealed that the Hounsfield unit (HU) of CSFD in the groups 2 (p = 0.000) and 5 (p = 0.019) groups were statistically greater than the control group. The groups 5, 4, and 6 had significantly increased bone strength parameters compared with the PBM in vivo, control, and ADS groups (all, p = 0.000). The group 5 was statistically better than the groups 4, and 6 (both, p = 0.000). In vitro preconditioned of hADS with PBM significantly increased bone repair in a rat model of CSFD in vivo.

Combined therapy of adipose-derived stem cells and photobiomodulation on accelerated bone healing of a critical size defect in an osteoporotic rat model.

We investigated the impact of human demineralized bone matrix (hDBM) plus adipose-derived stem cells (hADS) plus photobiomodulation (PBM) on a critical-sized femoral defect (CSFD) in ovariectomy induced osteoporosis in rats. There were 6 groups as follows. In group 1 (control, C), only CSFDs were created. Groups 2-6 were implanted with DBM into the CSFD (DBM-CSFD). In group 2 (S), only DBM was transplanted into the CSFD. In group 3 (S + PBM), the DBM-CSFDs were treated with PBM. In group 4, the DBM-CSFDs were treated with alendronate (S + ALN). In group 5, ADSs were seeded into DBM-CSFD (S + ADS). In group 6, ADSs were seeded into DBM-CSFD and the CSFDs were treated with PBM (S + PBM + ADS). At week eight (catabolic phase of bone repair), the S + ALN, S + PBM + ADS, S + PBM, and S + ADS groups all had significantly increased bone strength than the S group (ANOVA, p = 0.000). The S + PBM, S + PBM + ADS, and S + ADS groups had significantly increased Hounsfield unit than the S group (ANOVA, p = 0.000). ALN, ADS, and PBM significantly increased healed bone strength in an experimental model of DBM-treated CSFD in the catabolic phase of bone healing in osteoporotic rats. However, ALN alone and PBM plus ADS were superior to the other protocols.

A metal-organic framework/polymer derived catalyst containing single-atom nickel species for electrocatalysis.

While metal-organic frameworks (MOF) alone offer a wide range of structural tunability, the formation of composites, through the introduction of other non-native species, like polymers, can further broaden their structure/property spectrum. Here we demonstrate that a polymer, placed inside the MOF pores, can support the collapsible MOF and help inhibit the aggregation of nickel during pyrolysis; this leads to the formation of single atom nickel species in the resulting nitrogen doped carbons, and dramatically improves the activity, CO selectivity and stability in electrochemical CO2 reduction reaction. Considering the vast number of multifarious MOFs and polymers to choose from, we believe this strategy can open up more possibilities in the field of catalyst design, and further contribute to the already expansive set of MOF applications.

A data-driven perspective on the colours of metal-organic frameworks.

Colour is at the core of chemistry and has been fascinating humans since ancient times. It is also a key descriptor of optoelectronic properties of materials and is often used to assess the success of a synthesis. However, predicting the colour of a material based on its structure is challenging. In this work, we leverage subjective and categorical human assignments of colours to build a model that can predict the colour of compounds on a continuous scale. In the process of developing the model, we also uncover inadequacies in current reporting mechanisms. For example, we show that the majority of colour assignments are subject to perceptive spread that would not comply with common printing standards. To remedy this, we suggest and implement an alternative way of reporting colour-and chemical data in general. All data is captured in an objective, and standardised, form in an electronic lab notebook and subsequently automatically exported to a repository in open formats, from where it can be interactively explored by other researchers. We envision this to be key for a data-driven approach to chemical research.

Understanding How Ligand Functionalization Influences CO2 and N2 Adsorption in a Sodalite Metal-Organic Framework.

In this work, a detailed study is conducted to understand how ligand substitution influences the CO2 and N2 adsorption properties of two highly crystalline sodalite metal-organic frameworks (MOFs) known as Cu-BTT (BTT-3 = 1,3,5-benzenetristetrazolate) and Cu-BTTri (BTTri-3 = 1,3,5-benzenetristriazolate). The enthalpy of adsorption and observed adsorption capacities at a given pressure are significantly lower for Cu-BTTri compared to its tetrazole counterpart, Cu-BTT. In situ X-ray and neutron diffraction, which allow visualization of the CO2 and N2 binding sites on the internal surface of Cu-BTTri, provide insights into understanding the subtle differences. As expected, slightly elongated distances between the open Cu2+ sites and surface-bound CO2 in Cu-BTTri can be explained by the fact that the triazolate ligand is a better electron donor than the tetrazolate. The more pronounced Jahn-Teller effect in Cu-BTTri leads to weaker guest binding. The results of the aforementioned structural analysis were complemented by the prediction of the binding energies at each CO2 and N2 adsorption site by density functional theory calculations. In addition, variable temperature in situ diffraction measurements shed light on the fine structural changes of the framework and CO2 occupancies at different adsorption sites as a function of temperature. Finally, simulated breakthrough curves obtained for both sodalite MOFs demonstrate the materials' potential performance in dry postcombustion CO2 capture. The simulation, which considers both framework uptake capacity and selectivity, predicts better separation performance for Cu-BTT. The information obtained in this work highlights how ligand substitution can influence adsorption properties and hence provides further insights into the material optimization for important separations.

Preserving Porosity of Mesoporous Metal-Organic Frameworks through the Introduction of Polymer Guests.

High internal surface areas, an asset that is highly sought after in material design, has brought metal-organic frameworks (MOFs) to the forefront of materials research. In fact, a major focus in the field is on creating innovative ways to maximize MOF surface areas. Despite this, large-pore MOFs, particularly those with mesopores, continue to face problems with pore collapse upon activation. Herein, we demonstrate an easy method to inhibit this problem via the introduction of small quantities of polymer. For several mesoporous, isostructural MOFs, known as M2(NDISA) (where M = Ni2+, Co2+, Mg2+, or Zn2+), the accessible surface areas are increased dramatically, from 5 to 50 times, as the polymer effectively pins the MOFs open. Postpolymerization, the high surface areas and crystallinity are now readily maintained after heating the materials to 150 °C under vacuum. These activation conditions, which could not previously be attained due to pore collapse, also provide accessibility to high densities of open metal coordination sites. Molecular simulations are used to provide insight into the origin of instability of the M2(NDISA) series and to propose a potential mechanism for how the polymers immobilize the linkers, improving framework stability. Last, we demonstrate that the resulting MOF-polymer composites, referred to as M2(NDISA)-PDA, offer a perfect platform for the appendage/immobilization of small nanocrystals inside rendering high-performance catalysts. After decorating one of the composites with Pd (average size: 2 nm) nanocrystals, the material shows outstanding catalytic activity for Suzuki-Miyaura cross-coupling reactions.

A new post-synthetic polymerization strategy makes metal-organic frameworks more stable.

Metal-organic frameworks are of interest in a number of host-guest applications. However, their weak coordination bonding often leads to instability in aqueous environments, particularly at extreme pH, and hence, is a challenging topic in the field. In this work, a two-step, post-synthetic polymerization method is used to create a series of highly hydrophobic, stable MOF composites. The MOFs are first coated with thin layers of polydopamine from free-base dopamine under a mild oxygen atmosphere, which then undergoes a Michael addition to covalently graft hydrophobic molecules to the external MOF surface. This easy, mild post-synthetic modification is shown to significantly improve the stability of a number of structurally diverse MOFs including HKUST-1 (Cu), ZIF-67 (Co), ZIF-8 (Zn), UiO-66 (Zr), Cu-TDPAT (Cu), Mg-MOF-74 (Mg) and MIL-100 (Fe) in wet, caustic (acidic and basic) environments as determined by powder X-ray diffraction and surface area measurements.

MOF/polymer composite synthesized using a double solvent method offers enhanced water and CO2 adsorption properties.

A double solvent method is for the first time used to synthesize a polymer composite that is constructed by a Ni-pyrazolate MOF and polydopamine (PDA). The resulting composite shows significantly enhanced water and CO2 adsorption properties compared to the parent MOF and the composite synthesized without the double solvent method.

An experimental and computational study of CO2 adsorption in the sodalite-type M-BTT (M = Cr, Mn, Fe, Cu) metal-organic frameworks featuring open metal sites.

We present a comprehensive investigation of the CO2 adsorption properties of an isostructural series of metal-organic frameworks, M-BTT (M = Cr, Mn, Fe, Cu; BTT3- = 1,3,5-benzenetristetrazolate), which exhibit a high density of open metal sites capable of polarizing and binding guest molecules. Coupling gas adsorption measurements with in situ neutron and X-ray diffraction experiments provides molecular-level insight into the adsorption process and enables rationalization of the observed adsorption isotherms. In particular, structural data confirms that the high initial isosteric heats of CO2 adsorption for the series are directly correlated with the presence of open metal sites and further reveals the positions and orientations of as many as three additional adsorption sites. Density functional theory calculations that include van der Waals dispersion corrections quantitatively support the observed structural features associated with the primary and secondary CO2 binding sites, including CO2 positions and orientations, as well as the experimentally determined isosteric heats of CO2 adsorption.

Selective CO2 adsorption by a new metal-organic framework: synergy between open metal sites and a charged imidazolinium backbone.

Metal-organic frameworks (MOFs) are porous, tunable crystalline materials that are attracting widespread scientific attention for their potential use in post-combustion CO2 capture. In this work, we report the synthesis of a new ligand, 1,3-bis(4-carboxyphenyl)-4,5-dihydro-1H-imidazol-3-ium tetrafluoroborate, H2Sp5-BF4, that is subsequently used for the construction of a novel MOF, Cu-Sp5-EtOH. This highly crystalline material has a charged framework that is expected to give rise to high CO2/N2 selectivity. However, the pores of the parent structure could not be accessed due to the presence of strongly coordinated ethanol molecules. After solvent exchange with methanol and subsequently heating Cu-Sp5-MeOH under vacuum, we are able to liberate the solvent providing other small molecules like CO2 access to the inside of the now porous structure, Cu-Sp5. The combination of open metal sites and framework charge leads to an exceptionally high CO2/N2 selectivity, as determined by Ideal Adsorbed Solution Theory (IAST) calculations performed on single-component adsorption isotherms. The CO2/N2 selectivity of Cu-Sp5 reaches a value of over 200 at pressures typically found in post-combustion flue gas (0.15 bar CO2/0.85 bar N2), a value that is among the highest reported to date.

MOF-Derived Cobalt Phosphide/Carbon Nanocubes for Selective Hydrogenation of Nitroarenes to Anilines.

Transition-metal phosphides have received tremendous attention during the past few years because they are earth-abundant, cost-effective, and show outstanding catalytic performance in several electrochemically driven conversions including hydrogen evolution, oxygen evolution, and water splitting. As one member of the transition-metal phosphides, Cox P-based materials have been widely explored as electrocatalyts; however, their application in the traditional thermal catalysis are rarely reported. In this work, cobalt phosphide/carbon nanocubes are designed and their catalytic activity for the selective hydrogenation of nitroarenes to anilines is studied. A high surface area metal-organic framework (MOF), ZIF-67, is infused with red phosphorous, and then pyrolysis promotes the facile production of the phosphide-based catalysts. The resulting composite, consisting of Co2 P/CNx nanocubes, is shown to exhibit excellent catalytic performance in the selective hydrogenation of nitroarenes to anilines. To the best of our knowledge, this is the first report showing catalytic activity of a cobalt phosphide in nitroarenes hydrogenation.